Electro-permanent magnet lifting chuck is a common lifting tool widely used in various industrial fields. Here is a detailed introduction to its operation procedures and precautions.

Before use, make sure the surface of the electro-permanent magnet lifting chuck is clean and free from damage. If dirt or scratches exist on the surface, clean or replace the chuck to guarantee lifting safety.

Mount the chuck on lifting equipment such as a crane. Select suitable lifting equipment according to the rated load of the chuck, and confirm that the lifting equipment has sufficient load capacity.Place the chuck on the workpiece to be lifted. Ensure full contact between the chuck surface and the workpiece surface so that the magnetic force can be transferred effectively.

Lift the chuck together with the workpiece to the required height. During lifting, check constantly whether the magnetic force becomes weak or unstable. If such a situation occurs, stop lifting immediately and check the cleanliness of the chuck and workpiece surfaces.

When the workpiece reaches the target position, stop the lifting equipment and set down the workpiece. Release the magnetic force first, then gently remove the chuck from the workpiece surface.