Latest Updates and News from Luci Magnet

En
Shandong Luci Industrial Technology Co., Ltd.

How to Prevent Materials from Sliding During Lifting with Lifting Electromagnets

Nov 21,2026 1

To prevent load slipping during lifting with an electromagnetic lifting magnet, the following aspects should be noted:

  1. Ensure full contact: Before lifting, make sure the electromagnetic lifting magnet is in full contact with the load so that sufficient magnetic force can be generated. Keep the magnet perpendicular to the load surface. Slanting pulling, side pulling or sliding are strictly prohibited to achieve even distribution of magnetic force.

  2. Set parameters properly: Select the proper specification and model of the electromagnetic lifting magnet according to the weight, shape and material of the load, and set lifting parameters such as magnetic force and lifting speed correctly. When operating the magnet, switch on the power first and energize gradually to build up magnetic force slowly. Start lifting only after the magnetic force becomes stable.

  3. Watch out for environmental impacts: Avoid using the magnet in high-temperature, strong magnetic field or corrosive environments, as these conditions may impair its performance and safety. For humid working conditions, specially check cable integrity and electrical connections to prevent faults caused by damp wiring.

  4. Follow operating procedures: Operators must strictly comply with operating instructions and stay focused. Avoid rapid start and emergency stop to prevent swinging or falling of the lifted load. Keep observing the stability of the load and the magnetic force during lifting. Stop operation immediately and carry out inspection once any abnormality is detected.

  5. Conduct regular maintenance: Perform routine maintenance on the electromagnetic lifting magnet, including cleaning the magnetic surface, checking electrical connections and calibrating the control system, to keep it in good working condition. Pay special attention to the coils and excitation system to guarantee stable magnetic field and adequate holding force.

  6. Adopt safety measures: Auxiliary devices such as safety ropes and safety buckles can be used together to improve load stability during lifting. For heavy or critical loads, dual-magnet or multi-point lifting solutions may be considered to distribute lifting stress and enhance stability.

In conclusion, load slipping can be effectively avoided by ensuring full contact between the magnet and the load, setting lifting parameters correctly, considering environmental factors, complying with operating procedures, carrying out regular maintenance and adopting safety measures.


Wonderful! Share this Blog:

Related news

LUCI MAGNET

Magnets link to the world

Quick Contact

  • AddressNorth of Industrial Road, Linqing Economic Development Zone, Liaocheng City, Shandong Province, China
  • Phone+0086-15688878114
  • Emailw.eric@lucimagnet.com
  • WhatsApp0086-15688878114

Learn more about how our magnetic products can enhance your projects and take your business to the next level.

Your Name
Email Address
Your Tel
Message
© 2025 Shandong Luci Industry Technology Co.,Ltd. All Rights Reserved. Privacy Terms & Conditions Sitemap
index youtube tiktok instagram
  • AddressNorth of Industrial Road, Linqing Economic Development Zone, Liaocheng City, Shandong Province, China
  • Emailw.eric@lucimagnet.com
  • Phone0086-13884742546
  • WhatsApp0086-13884742546
Technical Support:NSW © 2024 Shandong Luci Industry Technology Co.,Ltd. All Rights Reserved.