The workpiece material exerts a significant impact on the holding performance of electro-permanent magnetic clamps. A detailed analysis is as follows:

Holding Performance on Magnetically Conductive Workpieces
Magnetically conductive workpieces: Electro-permanent magnetic clamps grip workpieces by magnetic force. For ferromagnetic workpieces such as ordinary steel and iron, the clamps can generate strong magnetic force to hold the workpieces securely.
Adsorption effect: Ferromagnetic materials feature high magnetic permeability. Magnetic flux lines can easily pass through the workpiece, creating strong magnetic attraction between the workpiece and the clamp. Therefore, electro-permanent magnetic clamps generally deliver excellent holding results on magnetically conductive workpieces.
Holding Performance on Non-magnetically Conductive Workpieces
Non-magnetically conductive workpieces: For non-ferromagnetic workpieces such as stainless steel, aluminum alloy and copper, the magnetic force of the electro-permanent magnetic clamp drops sharply. These materials have low magnetic permeability, which blocks magnetic flux lines and prevents effective magnetic force transmission.
Adsorption effect: The holding performance is usually poor for non-ferromagnetic workpieces. Especially for high-carbon grades, magnetic permeability is further reduced, and magnetic flux can barely penetrate the material. Such workpieces may not obtain sufficient clamping force from electro-permanent magnetic clamps.
Influence of Workpiece Size on Holding Performance.Besides material, workpiece size also affects the holding effect:
Small workpieces: Limited surface area provides insufficient contact area for magnetic force generation. Small workpieces are also prone to shifting or rotating due to uneven magnetic distribution.
Large workpieces: Although large workpieces have larger contact surfaces, adequate clamping force still cannot be guaranteed if they are made of non-ferromagnetic or high-carbon materials. Excessive weight of large workpieces may also cause deformation or damage to the clamp.

In conclusion, workpiece material is a critical factor for the holding performance of electro-permanent magnetic clamps. To achieve stable clamping, both material and size of the workpiece should be fully evaluated during clamp selection. Proper maintenance is also required to ensure long-term stable operation.