Generally, an electromagnetic chuck loses its suction force immediately after power cut. It works on the principle that magnetic field and holding force are generated when current passes through the coils. Once the power supply is disconnected, the magnetic field disappears, and the suction force vanishes accordingly.

Nevertheless, some specially designed electromagnetic chucks are fitted with holding devices such as permanent magnetic materials or backup power systems. These devices can provide limited holding force after power failure to keep the workpiece secured safely. Such special models are not widely available, and their holding force and duration are limited.

Therefore, most electromagnetic chucks lose suction right after power outage and cannot hold workpieces anymore. Operators must bear this in mind and take adequate safety precautions to prevent accidental falling of loads and avoid accidents.